This kit is the largest inlet pipe available and offers over a 50% increase in airflow volume in comparison to the factory inlet pipe! Our Turbocharger Inlet Pipe Installation Kit allows 2018+ Accord, 2019+ TLX & RDX customers to seamlessly install install any factory fitment FK8 Civic Type-R style turbocharger inlet pipe without excess modifications. Please note that this kit does not include the Intake Conversion Hose that is required to connect the designated inlet pipe to your High Volume Intake System. All components use high quality, high temperature-rated materials for longevity peace of mind.
- In a nutshell, “flex-fuel” allows an internal combustion engine to flexibly utilize one or more different fuels (usually gasoline blended with either ethanol or methanol fuel), and both fuels are stored in the same common fuel tank.
- But just in case let’s go back and make sure your PRL have arrived safe and sound.
- In the ‘Recipient’ box, paste the Ethereum wallet address you just copied from KuCoin.
- Our flexible rubber base ensures a consistent, airtight seal, absorbs vibration and withstands millions of heat cycles.
- In this step-by-step guide we’re going to go through some steps you may have already done if you’ve been trading cryptocurrencies, so feel free to step ahead.
- Due to rising gas prices and the push for alternative fuel sources, ethanol, derived primarily from corn, has become a common, cost-effective fuel choice.
Specially designed, lightweight filter lubricant is designed to be vehicle sensor-friendly and create a positive (+) magnetic charge, or ionic bond, with the filter’s stainless steel mesh. This positive charge attracts negatively (-) charged dust particles from entering the filter, causing them to stick to the stainless steel mesh, which allows the cotton to remain clear for maximum airflow. Each filter is manufactured by using a four-step, low-pressure injection molding process to bond the rubber base to the interior components.
Retaining a fixed position, like the factory bushings, was a key goal during development. This feature ensures that the bushing cannot prematurely wear from freely move around on the inner metal stud, unlike other aftermarket options. Our design also retains the factory approach of a multi-piece smaller bushing. This allows for all movement to be contained within Delrin sleeves, which drastically reduces wear.
PDF – 2016-2021 Honda Civic 1.5T Short Ram Intake System Install Instructions (Standard Bore)
Maximize your FK8’s engine intake system and turbocharger potential with the PRL Motorsports Turbocharger Inlet Pipe Kit. This kit is a direct bolt-on upgrade that eliminates intake airflow restriction before the turbocharger, allowing the turbocharger to operate more efficiently. Our design utilizes a cast aluminum inlet piece to allow smooth transition from the gasket-matched 64mm ID compressor inlet to a 80mm OD / 78mm ID outlet throughout the Titanium crossover pipe.
Our engineers were able to profile the volute and locate the MAF sensor flange in the optimal location to help keep fuel trims extremely stable. This will require a tune/MAF scaling and is only compatible with our High Volume Intake System. This upgrade is more-so intended for customers looking to make over 450 horsepower.Customers can also convert from Big Bore MAF housing to Standard Bore MAF housing. The PRL Motorsports Stage 1 Intake System offers great gains at an affordable price. This kit replaces the corrugated factory inlet hose with our better looking, smoother flowing 4-ply silicone hose and high flow air filter. The pleats found in the factory hose disrupts air flow, which limits power potential and throttle response.
Search for the PRL/ETH pair (or just search PRL on the ‘search coin’ box on the right side). Copy this address somewhere, as this is where you’ll be sending ETH from your Coinbase account. Only send ETH to this address if you send any ERC20 token (like PRL) it will be lost forever. The next steps assume you used the affiliate link (it’s free money after all) but even if you don’t use it, the process will be very similar. Now that we have a functioning ether wallet, it’s time to acquire some ETH. Remember to write down this password on a piece of paper as if you lose it you may lose access to your money.
This process virtually eliminates rubber seepage for maximum airflow and aesthetics, unlike other manufacturing methods which can block airflow up to 25%. Our flexible rubber base ensures a consistent, airtight seal, absorbs vibration and withstands millions of heat cycles. The PRL Motorsports front pipe upgrade promotes optimal airflow and is recommended for customers looking to push his or her 2017+ Honda Civic Type-R even further.
The PRL Motorsports front pipe upgrade promotes optimal airflow and is recommended for customers looking to push his or her 2023+ Honda Civic Type-R even further. This kit replaces the corrugated factory inlet hose with our better looking, smoother flowing 4-ply silicone hose. Each kit utilizes a large spherical bearing to allow for 2-axis of movement and minimize wear while eliminating the chance of binding that other aftermarket options can cause. We designed the aluminum inserts in both bushings to feature machined index-grooves, which secures each bushing to the metal stud.
INSTALLATION:PDF – 2018-2022 Honda Accord Intercooler Install Instructions
Factory mounting points are retained for ease of installation and to meet various racing class specifications, such as SCCA Street Touring. Our chassis-specific installation kits allow customers to install our Universal Helix Air Oil Separator Kit directly onto their vehicle without any custom fabrication, cutting or modification. Improve shifter stability and precision shifting with the PRL Motorsports Shifter Base Bushing Upgrade.
Integral O-rings are used on the outer sleeves of each bushing to provide a tight seal and feel. In a nutshell, “flex-fuel” allows an internal combustion engine to flexibly utilize one or more different fuels (usually gasoline blended with either ethanol or methanol fuel), and both fuels are stored in the same common fuel tank. Flex-Fuel systems utilize an ethanol content analyzer to determine the amount of ethanol in a fuel system and a converter to send this reading to the vehicle’s ECU to instantaneously adjust for varying fuel mixtures. Our expansion tank is constructed of TIG-welded, 3mm thick aluminum and anodized gloss black durability. Each tank includes a billet aluminum cap, sight glass and custom lower fitting to fit the factory coolant line. This kit requires no modification for installation and reuses all factory hardware.
You can store coins on exchanges after purchase but we recommend using a dedicated wallet for security and long term storage. They are the best choice for those storing a lot of value or planning to hold long term. An ideal way to save wear and tear on your original carpets, the All-Season Floor Mats are designed to trap and hold dirt, sand, mud and water.
- And remember to always activate 2FA on everything you can and to make backups of your backups!
- Copy the string on the “Your Address” field and save it somewhere accessible, this is where you’ll send the PRL at the end of this guide.
- Because of these characteristics, ethanol is a cheap alternative to expensive race fuels like race gas and/or methanol, especially with high(er) compression factory turbocharged vehicles.
- Our expansion tank is constructed of TIG-welded, 3mm thick aluminum and anodized gloss black durability.
- When used in dusty or off-road environments, filters will require cleaning more often.
As a company founded by enthusiasts with grassroots racing history dating back into the late 90’s our team understands the importance of keeping Honda’s racing heritage alive. Our goal with the Throwback Strut Bar project was to design a strut bar that was as light and structurally rigid as possible while reminiscent of the OEM strut bar offered on the iconic DC2 Acura Integra Type-R. The PRL Motorsports Throwback Strut Bar increases chassis strength, rigidity, and drastically reduces body flex to improve vehicle handling.
Due to rising gas prices and the push for alternative fuel sources, ethanol, derived primarily from corn, has become a common, cost-effective fuel choice. Ethanol has now found its way into most modern gas stations and the community now understands its list of benefits in comparison to gasoline, such as the fact ethanol burns cleaner, cooler and is more resistant to detonation. Because of these characteristics, ethanol is a cheap alternative to expensive race fuels like race gas and/or methanol, especially with high(er) compression factory turbocharged vehicles.
You can also keep it in a digital format somewhere you think safe, but I’d recommend at least one physical backup. In this step-by-step guide we’re going to go through some steps you may have already done if you’ve been trading cryptocurrencies, so feel free to step ahead.
PDF – 2022+ Honda Civic 2.0L High Volume Intake System Install Instructions
Copy the string on the “Your Address” field and save it somewhere accessible, this is where you’ll send the PRL at the end of this guide. If you use the method of the key file and password explained previously you won’t need to use it, which is good because anyone who knows this has full access to your wallet. Just write this down on a piece of paper somewhere for if you lose the key file.
Enter your (real) name and address, you’ll have to back this information with a real document later during the verification process. For the password, I would recommend the same method as the wallet, something long and random. You’ll also have two-factor authentification here, so this is not as critical as your wallet password. This doesn’t mean you should reuse any password or use common words for one, of course. PRL Motorsports recommends visually inspecting the air filter for screen visibility at every oil change and requires cleaning the air filter element whenever the screen is no longer visible or every 30,000 miles, whichever comes first. When used in dusty or off-road environments, filters will require cleaning more often.
Exhaust components that may become damaged over time from being coated, heat wrapped or otherwise insulated in some capacity are not covered under the PRL Motorsport’s Manufacturer Warranty. Insulating these components can cause heat to cause degradation of the material faster than would normally occur. And remember to always activate 2FA on everything you can and to make backups of your backups! You don’t want to be like those people who lost hard drives with 10k BTC inside.
Stay Up to Speed with PRL!
The front pipe is the first component in the exhaust path after the end of the emissions control system. Aside from the 3-bolt front-pipe flange, all connections are slip-fit connections for adjustment and packaging purposes. We elected to use a muffler clamp / exhaust hanger to support the muffler instead of welding on a hanger for longevity, adjustment and serviceability. All components are TIG welded and fully back-purged to withstand exhaust gas temperatures and outside elements. Pair this with our 3″ Front Pipe Upgrade for maximum exhaust flow and performance! All kits will include premium hardware, components and gasket for seamless installation.
The PRL Motorsports aluminum Coolant Expansion Overflow Tank replaces the unattractive, factory plastic tank with this sleek and sturdy aluminum tank that better fits the aesthetics underneath the hood of your car. The internal volume of our Coolant Expansion Tank is equivalent to the factory tank, resulting in no coolant loss. Fits all 2023+ Honda Civic Type-R FL5Fits all variant models including RHD, International Models, Etc.Fits factory charge piping or pair with PRL Motorsports Charge Pipe Upgrade Kit for the best performance.
Recommended from Medium
Now you should choose a password which is hard to guess but that you’ll remember. I recommend using a random password generator with a minimum password length of 25 characters for maximum security, but something long and that you’ve NEVER used before will also work. Fits all 2022+ Honda Civic 1.5TFits all variant models including Si, CVT, 6MT, RHD, International Models, Etc. Fits all 2022+ Honda Civic 1.5TFits all 2023+ Honda Accord 1.5TFits all 2023+ Acura Integra 1.5TFits all variant models including Si, CVT, 6MT, RHD, International Models, Etc. Fits all 2023+ Acura Integra 1.5TFits all variant models including Base, A-Spec, Technology, CVT, 6MT, RHD, International Models, Etc. Fits all 2022+ Civic 1.5L Turbo & 2.0LFits all variant models including Si, CVT, 6MT, RHD, International Models, Etc.
Delrin is a resistant to most chemicals and self-lubricating, which is perfect for shifter bushings. If you do not use this spacer, the PRL bracket will not reach the tab on the factory bracket. Properly attaching this bracket ensures the silicone tube will not be touching the factory bracket closest to the front of the vehicle.
But just in case let’s go back and make sure your PRL have arrived safe and sound. Go to MyEtherWallet.com and open your wallet following the last steps of the first part of this guide. In the ‘Recipient’ box, paste the Ethereum wallet address you just copied from KuCoin. For those of you paranoid about trusting an online site, you may download the entire wallet here and run it on your own computer (even offline!). There are multiples guides on how to run the software offline, so this guide is written under the hypotheses that you’re using the online version.
This upgrade replaces the OEM rubber bushings and replaces them with solid 6061 anodized aluminum inserts for increased rigidity and longevity. Improve shifter stability, bushing longevity and reduce cable-binding with the PRL Motorsports Shifter Cable Bushing Upgrade. This upgrade replaces the OEM rubber bushings and replaces them with a combination of 6061 anodized aluminum inserts and Delrin sleeves for increased rigidity and longevity.